Table of Contents
Advertisement
[Synchronized playback]
Select [Synchro.] in the [Playback] field. You can play back
simultaneously the audio and image of the data down-
loaded in blocks via network or the data copied together
with audio by a recorder. Only one playback channel is
displayed in this case. Audio is not played back during other
than normal playback (such as fast-forward playback and
reverse playback). The [LipSync] slide bar should be ad-
justed according to the PC to be used and the recording
status of data to be played back. In some cases, there
may not be found an optimum position where the picture
and audio synchronize with each other.
In synchronized audio playback, the frequency of picture
refreshing is reduced depending on the processing power
of PC. When you want to playback giving priority to picture,
select [Not Synchro.].
The settings on this panel remain intact for the next startup.
Audio playback channel and picture display channel are
not related. You can play back them in any combination.
When data are played directly from a drive that is slow to
read CD and DVD, audio may be output intermittently. Play
back data after copying it to a HDD.
File menu
Convert
When clicking during the playback is stopped, [Convert]
screen appears. Specify the range to be converted and
the camera number, and then press the [JPEG] or [AVI]
button to convert and save the picture data collectively.
Collective conversion requires adequate free space in the
physical memory and the HDD for temporary files (the sys-
tem partition and save drive). The limitations of available
memory space and HDD space vary depending on your
operating conditions. Perform conversion starting from a
small file that requires only several seconds to be con-
verted while checking the state of the memory and the
HDD.
Search menu
Search
When clicking, the [Time Search] screen appears. Specify
the date and time to be searched, and then click the
[Search] button. The picture of the specified time or around
such time appears. The search may not be performed when
the date and time information of the recorded contents is
not chronological such as the data which is added to the
existing data.
Operation menu
For [Playback], [Stop], [Reverse Playback], [Forward Search],
[Reverse Search], [Field Advance], [Field Reverse], or
[Rewind], refer to the section of the "Operation panel."
Bookmark menu
A-, B-
Click to register the current playback position as Point A or
Point B to repeat playback between those positions.
Repeat between A and B
Put a check mark to repeat playback between Point A and
Point B you specified.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic operations
View menu
Picture Size
When clicking, the options of [100%], [75%], [50%], and
[25%] appear. Pictures are zoomed in or out according to
the selected magnification.
Decode Level
When clicking, the options of [Fine], [Middle], and [Rough]
appear. When setting the decode level to rough, the pic-
ture becomes rough and the playback update speed be-
comes faster.
Title Bar
When clicking, the options of [Date Time] and [Alarm] ap-
pear. Put a check mark to the item to be displayed on the
screen.
Grouping menu
Grouping Pattern
When clicking, the [Grouping Pattern] screen appears.
When you click the [4 Multi], [6 Multi], [9 Multi], [10 Multi],
[13 Multi], or [16 Multi], the split screen of the selected
pattern appears. Click "Setting" to display the setting screen
to set the position of the camera to be displayed in each
screen.
Menus appearing with right button clicking
To use the following functions, click the right button of the
mouse on the screen to be operated. The following
functions are performed only for the clicked screen.
During playback:
Picture Size
Refer to the section of the "View menu."
Decode Level
Refer to the section of the "View menu."
During stopping playback:
Copy
Click to copy the picture being displayed onto the clipboard.
Save As
When clicking, the [Save As] screen appears. You can save
the picture being displayed as either a Windows bitmap
file (.bmp) or a JPEG file (.jpg).
Picture Size
Refer to the section of the "View menu."
Decode Level
Refer to the section of the "View menu."
Print
When clicking, the [Print] screen appears. After setting the
[Margins], [Printer Settings...] and other options, click [Print]
button to print the picture being displayed.
When playing the data recorded in frame recording, the
outline of the picture may be serrated. In this case, set the
picture size to larger setting.
When loading the media with a lot of picture data copied,
playback software may take time to be started up.
23
Advertisement
Table of Contents
