The Function Of The Split/Sequence Button, Zoom Button, And Camera Number Buttons - Mitsubishi Electric DX-TL950E Installation And Operation Manual

<MPX DISPLAY SETTINGS> (continued)

The function of the SPLIT/SEQUENCE button, ZOOM button, and camera number buttons

The screen of cameras with no video input signal will appear blue. Furthermore, the screen of cameras set to
"OFF" for COVERT CAMERA SETTING will appear black (
Display
SPLIT9
SPLIT4 (a)
SPLIT4 (b)
SPLIT4 (c)
SPLIT4 Sequential
SPLIT4 sequential screen
can be switched.
Single screen Seqential
Single screen sequential
can be switched.
Not
enlarged
Single
screen
Enlarged
During Alarm recor-
ding and Motion
detection recording
*If the Alarm signal is
input during
SPLIT/ SEQUENCE
mode.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
36
SPLIT/
ZOOM
SEQUENCE
button
button
ZOOM
OFF
SPLIT/
OFF
SEQUENCE
ZOOM
OFF
SPLIT/
OFF
SEQUENCE
Iluminating
ZOOM
SPLIT/
OFF
SEQUENCE
Iluminating
ZOOM
SPLIT/
OFF
SEQUENCE
OFF
ZOOM
SPLIT/
OFF
SEQUENCE
OFF
ZOOM
SPLIT/
Iluminating
SEQUENCE
see page 76).
Illuminating/Off of Camera number buttons
The video of camera number selected in <OUTPUT A>
(<OUTPUT B>) } <SPLIT9 SCREEN SETTING> screen
is displayed using SPLIT9 display.
During video display, the corresponding camera number
button lights.
The video of camera number selected in <OUTPUT A>
(<OUTPUT B>) } <SPLIT4 SCREEN SETTING> screen
is displayed using SPLIT4 display.
During video display, the corresponding camera number
button lights.
The SPLIT4 screen video set in <OUTPUT A>
(<OUTPUT B>) } <SEQUENCE SETTING> screen is
displayed and updated in order by the set switching time.
During video display, the corresponding camera number
button lights.
The single screen video set in <OUTPUT A>
(<OUTPUT B>) } <SEQUENCE SETTING> screen is
displayed and updated in order by the set switching time.
During video display, the corresponding camera number
button lights.
Camera number button which has display is
illuminating.
Camera number buttons which has been activated as
100%, 200% or 400% will be illuminated.
Not available the magnification function when the
OUTPUT B indicator illuminates.
Regardless of SPLIT9, SPLIT4 or Single screen,
camera number buttons which are activated via
the Alarm recording start flashing.
Page
37,38
37
38
38
35
35
-