Auto Set Up - Mitsubishi Electric DX-TL950E Installation And Operation Manual

AUTO SET UP

AUTO SET UP
AUTO SET UP is displayed, in order to set up an indispen-
sable function, when this unit is turned on for the first time.
Only when the unit is turned on for the first time,
the AUTO SET UP screen is displayed automatically. It
is not automatically displayed after next time.
1. After connect the cameras and the monitors, turn on the
MAIN switch on the rear of the unit and wait until the ACCESS
indicator is turned off, then press the POWER button on the
front.
• The <LANGUAGE SELECTION> screen is displayed. The
language of the menu can be selected in this screen.
<LANGUAGE SELECTION>
>>LANGUAGE
EXECUTE
JOG :SELECT
SHUTTLE>>:EXECUTE
POWER button operation will not be accepted while
the ACCESS indicator is flashing. Press the POWER
button after the indicator turns off.
2. Turn the SHUTTLE ring clockwise.
• The background of the setting changes to red and flashes.
• Setting ( default : "ENGLISH" )
"ENGLISH", "FRANCAIS", "DEUTSCH", "ESPAÑOL",
" P y CCK N
N ", "ITALIANO"
3. Turn the JOG dial to display the desired setting and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
Beware while setting the AUTO SET UP, the menu
screen can not be exited. Furthermore the screen al-
ready set can not be displayed again.
4. Turn the JOG dial to move the cursor to "EXECUTE", and
turn the SHUTTLE ring clockwise.
• The <TIME DATE ADJUST> screen appears.
• The date/time is set in this screen.
<TIME DATE ADJUST>
>>DAYLIGHT SAVING
DAY
MONTH
YEAR
TIME
APPLY
EXECUTE
JOG :SELECT
SHUTTLE>>:EXECUTE
5. Set the desired setting in this screen referring to "
DAYLIGHT SAVING/DAYLIGHT SETTING (
" TIME DATE ADJUST (
By turning the JOG dial to the cursor to "APPLY"
and turn the SHUTTLE ring clockwise, "00:00:00" of
"TIME" will start after the moment of turning the SHUT-
TLE ring.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• AUTO SET UP
ENGLISH
OFF
01
01
2004
00:00:00
see page 20)",
see pages 20,21)".
6. Turn the JOG dial to move the cursor to "EXECUTE", and
turn the SHUTTLE ring clockwise.
• "PERFORM AUTO SET UP?" is displayed on the screen.
PERFORM AUTO SET UP?
>>YES
NO
SHUTTLE>>:EXECUTE
7-1. (When not execute AUTO SET UP • • • )
Select "NO" by turning the JOG dial and turn the SHUTTLE
ring clockwise.
• "SETTING UP..." is displayed on the screen, and the unit
starts-up.
7-2. (When execute AUTO SET UP • • • )
Select "YES" by turning the JOG dial and turn the SHUTTLE
ring clockwise.
• The <CAMERA CHECK> screen appears.
• The cameras connected and the video condition can be
confirmed in this screen.
<CAMERA CHECK>
>>EXECUTE
CHECK CAMERA CONNECTION AND
IMAGE BEFORE EXECUTE
SHUTTLE>>:EXECUTE
8. Turn the SHUTTLE ring clockwise.
• The <AUTO RECORD SETTING> screen appears.
• The period of the record can be set.
• Setting of AUTO RECORD SETTING ( default : "24H" )
"24H", "48H", "72H", "96H", "120H", "144H", "1WEEK",
"2WEEK", "3WEEK", "1MONTH", "2MONTH", "3MONTH",
"4MONTH", "5MONTH", "6MONTH", "1YEAR"
<AUTO RECORD SETTING>
>>RECORDING CYCLE
EXECUTE
JOG :SELECT
SHUTTLE>>:EXECUTE
9. Turn the SHUTTLE ring clockwise.
• The background of the setting changes to red and flashes.
10. Turn the JOG dial to display the desire setting and turn the
SHUUTLE ring cloclwise.
• The setting is confirmed and flashing stop.
11. Turn the JOG dial to move the cursor to "EXECUTE", and
turn the SHUTTLE ring clockwise.
• The <RECORD SETTING> screen appears.
• The recording interval and recording picture quality of
normal recording and alarm recording corresponding to each
camera numbers can be set in this screen.
24H
17