Warnings And Call Out Output; Warnings And Their Appropriate Countermeasures - Mitsubishi Electric DX-TL5000E User Manual

Warnings and CALL OUT output

Warnings and their appropriate countermeasures

#1 Options in the CALL OUT output column:
• Selectable: Selects to output CALL OUT signal or not on the menu screen.
• Fixed: Outputs CALL OUT signal from the CALL OUT terminal regardless of the menu setting.
• None: Does not output CALL OUT signal, but displays a warning on the screen.
• CALL OUT signal output can be stopped by pressing the E button or clicking "Clear Warning" while displaying the
warning display.
Warning Display
The remaining capacity of Normal Area
in Main device has become less than **%.#2
The remaining capacity of Alarm Area
in Main device has become less than **%.#2
The remaining capacity of LPA Area
in Main device has become less than **%.#2
The remaining capacity of Copy B disk
has become less than **%.#2
The remaining capacity of Normal Area
in Main device has become 0%.
The remaining capacity of Alarm Area
in Main device has become 0%.
The remaining capacity of LPA Area
in Main device has become 0%.
The remaining capacity of disc in Copy A
drive has become 0%.
The remaining capacity of disc in Copy B
drive has become 0%.
Copy data size error.
Check the range of copy data or the disk
space of copy media.
Copy media error.
Cannot copy the data.
Check the copy device.
No disk.
The drive has no disk or wrong type of disk.
Put a proper disk into the drive.
The remaining capacity of disc in Copy A
drive has become 0%.
Put a new disc into the drive.
The remaining capacity of disc in Copy B
drive has become 0%.
Put a new disc into the drive.
#2 : The value depends on the setting.
#3 : Log number for Recording
#4 : Log number for Restore
#5 : Log number for COPY A
#6 : Log number for COPY B
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
30
Countermeasure
• Copy data as necessary.
• When the warning is
cancelled, the unit will start
over-writing the oldest data
remaining in the hard disk
drive.
• Copy data as necessary.
• Replace media if necess
-ary.
• Set the copy/restore
range again.
• Replace with new media.
• Check media in recording
device. (Insert the media
if there is none.)
• Check whether it is write-
protect by media. Cancel
protection if it is protected.
• After peripheral recording
device and the unit power off
a power supply, reboot in the
order of peripheral recording
device and the unit.
• After peripheral recording
device and the unit power
off a power supply, check a
cable and termination
(for SCSI device only).
• Insert the disc.
• Replace the disc.
#7 : (The following numbers are in
0 1 : CH 1 0 5 : CH 5 0 9 : CH 9
0 2 : CH 2 0 6 : CH 6 1 0 : CH 10 1 4 : CH 14
0 3 : CH 3 0 7 : CH 7 1 1 : CH 11 1 5 : CH 15
0 4 : CH 4 0 8 : CH 8 1 2 : CH 12 1 6 : CH 16
Cancelling
Log number
the warning
LOG1200
Click "Clear
Warning" or
press the E LOG1201
button.
LOG1202
LOG7200
Click "Clear LOG1100#3
LOG4100#4
Warning" or
press the E LOG1101#3
button. LOG4101#4
LOG1102
Click "Clear LOG3100
Warning" or
press the E LOG7100
button.
LOG3701#5
Click "Clear
Warning" or LOG7701#6
LOG4701#4
press the E
button.
Click "Clear LOG3702#5
LOG7702#6
Warning" or
LOG4702#4
press the E
button.
LOG3703#5
Click "Clear
Warning" or LOG7703#6
press the E LOG4703#4
button.
Click "Clear LOG3704#5
Warning" or
press the E
button. LOG7704#6
)
#8 :
1 3 : CH 13 14 : Recording 24
34 : Copy A
44 : Restore
(The following numbers are in
00 : A (Internal)
01 : B (Internal)
02 : C (Internal)
03 : D (Internal)
CALL OUT
output
#1
Selectable
Selectable
None
Selectable
None
None
None
None
: Playback
74 : Copy B
)
10 to 26 : USB (External)
30 to 35 : SCSI (External)
40 to 47 : NAS (External)