Mitsubishi Electric DPSClick User Manual page 9

DPSClick User Manual
3 –STARTING UP THE SYSTEM
3.1 – Initialising equipment and software.
WARNING: for the system to work properly, you must observe the following order when
switching on the equipment.
– Steps to follow:
a) Switch on the printers and scanners first. Switching on the printers first is more
important if they use the SCSI bus to communicate with the rest of the equipment. In
this case, make sure that they are in ON LINE mode (green light on) before
proceeding to the next step. If this procedure is not followed, switching them on once
the IT2000 has started up will be useless.
b) Switch on the Image Processing Terminal (IT2000).
c) After a few seconds, the automatic start–up of the operating system and print server
screen for DPSClick will appear.
3.2 – Power–off
To switch off the equipment, use the "EXIT" icon on the main screen. The equipment will
switch off automatically. You may also switch off printers and scanners if you wish.
9
v. 4.0