Mitsubishi Electric DPSClick User Manual page 60

DPSClick User Manual
It is possible that during the scan process you were warned with a message like this:
This message warns you that you have inserted the film with the emulsion down. This
means that you will obtain the scanned pictures mirrored, and the quality will be lower. In order
to obtain the best results you would have to cancel scan and insert the film again in the correct
position.
There are these other quality warnings:
Film tail first: means that you have inserted the film starting with the tail, and it is possible that
the picture numbers were recognized incorrectly.
Lens/Light bar cleaning required: means that you have dirty parts of your scanner, which can
affect the results. See users guide or contact your dealer to know how to clean the scanner.
After scan, the thumbnails of the images will appear at Pakon browser:
With this button you can view all Pakon messages showed in this session.
60
You can choose not show the message
again (only for warning messages).
To hide message, press OK button.
If the film has been retained into the scanner, you can
expulse it moving back or forward, using these control
buttons. Don't leave a film in the scanner, because you
will be warned to have film in guides the next time you
want to scan.
v. 4.0