Mitsubishi Electric DPSClick User Manual page 29

DPSClick User Manual
Once you have the first image adjusted, you only have to push the "Next" button (B), and
automatically will appear a form to validate or discard the changes and you will navigate to the
next image selected. You will be asked, too, if you want to apply the same saving options in
all images, in order to speed up adjustments (see section 4.3.8.6). To go back to a previous
image, press "Back" button (A).
Click OK button to exit Adjustments screen. It will appear the same form to validate or
discard the changes of the current image.
4.3.8.1 – Basic Adjustments
This section on adjustments is for changing the following parameters very quickly:
The three rows of buttons on the left correspond to the colour balance of the Red, Green
and Blue channels, or the equivalents Cyan, Magenta and Yellow, in that order. The central
values are always checked with the zero value.
If you click a button to the right of the main button you are reinforcing the corresponding
channel towards the colour indicated by the main button. Thus, for example, if you click button 2
of the first row corresponding to the Cyan colour, the cyan in the image will be increased by 2
points, whereas if you click button –2 of the same row the cyan value will be reduced by two
points, or the red channel will be increased by two points, which is the same thing.
Thus, the values to the right of the second row (magenta) will increase the magenta
channel, whereas the left side increases the green channel. Finally, in the yellow row, the right
side increases yellow and the left increases blue.
29
A B
v. 4.0