Mitsubishi Electric DPSClick User Manual page 62

DPSClick User Manual
4.9– DPSCLICK CONFIGURATION
'Settings' Screen
This button of the main screen is used to access the Configuration screen, where
the different parameters of the program can be configured.
4.9.1 – General.
This section configures the general options of the application, such as language, the type
of format you wish to print with, etc.
LANGUAGE
MEASURE
FORMAT A
FORMAT B
FORMAT C
DPSClickArts: through this icon it is possible to start an updating procedure of
new ClickArts CD, DPSCalendars CD, etc. if a new CD is available. You can
acces this icon whatever settings screen tab is selected.
PhotoClickCD: through this icon is possible to launch the application on a
PhotoClickCD. You can use it to test a PhotoClickCD after burning. You can
acces this icon whatever settings screen tab is selected.
Update...: only for updating procedures.
62
Selects the language of the application.
Unit of measure used to display dimensions in any screen of
the program: centimetres or inches.
First type of predetermined print format.
Second type of predetermined print format.
Third type of predetermined print format.
v. 4.0