Mitsubishi Electric DPSClick User Manual page 13

DPSClick User Manual
4.2 – IMAGE INPUTS
This screen is used to select the picture source device, this may be either a storage device
or a Scanner, depending on the screen being accessed.
4.2.1 – Digital Camera
Pictures can be loaded from the typical storage devices used in most digital cameras.
DO NOT FORGET TO SWITCH OFF THE DIGITAL CAMERA BEFORE
REMOVING THE CARD FROM THE INSIDE. OTHERWISE THE DATA ON THE
CARD MAY BE LOST.
The camera device is selected automatically, i.e. the different inputs are checked, and
the type of card inserted is detected automatically.
The pictures will be copied temporarily to memory to avoid changing the card data.
Once the images have been loaded the customer must remove the digital card and all the
work will be done with this copy. The pictures will be deleted automatically at the end of the
session unless they are exported.
DO NOT REMOVE THE CARD UNTIL PROMPTED TO DO SO BY THE
PROGRAM
13
v. 4.0