Mitsubishi Electric DPSClick User Manual page 40

DPSClick User Manual
4.3.10.1 – Fusion
When you press this button to apply the fusion effect on an object on the
'Decoration' screen, the fusion configuration dialogue box will appear. Here you
can define its degree and choose a mask or create it again.
To apply the fusion effect you must define the degree of fusion and select a
mask from the list of available masks. There are also other options:
You can create new masks to add to list of available masks. After clicking this
button you can draw a region on the image.
During the region drawing process, new regions can be added to the current one
by pressing the Shift key on the keyboard as you draw the new area, or you can
delete part of the region created using the ctrl key.
This button transforms the region defined on the image into a new mask, which
must be named.
If you have created a mask you will never use again you can delete it by
pressing this button.
If you accept without saving the mask, the latter will be applied, although it will
not be saved for future applications.
40
v. 4.0