Table of Contents
Advertisement
Initial network settings (continued)
IP Address Settings
1. Display the IP CONFIG menu.
2. Press the or button to select IP ADDRESS.
IP ADDRESS
3. Press the ENTER button.
• IP ADDRESS screen appears.
IP ADDRESS
192 . 168 .
0
1
2
3
OK
4. Press the direction buttons to move the key cursor,
select the numbers to enter, and press the ENTER
button.
• Set the numeric value within the range from 0 to
255. However, set the numeric value for the fi nal
octet within the range from 1 to 254.
key:
Shifting the position of enter cursor to
the left.
key:
Shifting the position of enter cursor to
the right.
DEL key: Deleting the character in the position
of enter cursor for each character.
CLEAR key:
5. When selecting OK, the setting is completed as
the IP ADDRESS stored temporarily. However,
when selecting CANCEL, the setting is completed
without storing.
• When the setting you entered is correct, the
IP CONFIG menu is displayed. If the entered
content is not correct, the IP CONFIG menu is
displayed after an error dialog is displayed.
• Until the execution of SAVE SETTING, the
change is not saved.
192. 168. 1. 10
1 . 10
←
→
DEL
4
5
6
7
8
9
CLEAR
CANCEL
Deleting all the entered
characters.
Subnet Mask Settings
1. Display the IP CONFIG menu.
2. Press the or button to select SUBNET MASK.
SUBNET MASK
3. Press the ENTER button.
• SUBNET MASK screen appears.
4. Enter the Subnet Mask.
• Refer to IP Address Settings for the detail of
entering.
5. When selecting OK, the setting is completed as
the Subnet Mask stored temporarily. However,
when selecting CANCEL, the setting is completed
without storing.
• When the setting you entered is correct, the
IP CONFIG menu is displayed. If the entered
content is not correct, the IP CONFIG menu is
displayed after an error dialog is displayed.
• Until the execution of SAVE SETTING, the
change is not saved.
Default Gateway Settings
1. Display the IP CONFIG menu.
2. Press the or button to select DEFAULT
GATEWAY.
DEFAULT GATEWAY
3. Press the ENTER button.
• DEFAULT GATEWAY screen appears.
4. Enter the Default Gateway.
• Refer to IP Address Settings for the detail of
entering.
5. When selecting OK, the setting is completed as
the Default Gateway stored temporarily. However,
when selecting CANCEL, the setting is completed
without storing.
• When the setting you entered is correct, the
IP CONFIG menu is displayed. If the entered
content is not correct, the IP CONFIG menu is
displayed after an error dialog is displayed.
• Until the execution of SAVE SETTING, the
change is not saved.
EN-42
255. 255. 255. 0
SUBNET MASK
255 . 255 . 255 .
0
←
→
DEL
0
1
2
3
4
5
6
7
8
9
CLEAR
OK
CANCEL
192. 168. 1. 10
DEFAULT GATEWAY
192 . 168 .
1 . 10
←
→
DEL
0
1
2
3
4
5
6
7
8
9
CLEAR
OK
CANCEL
Advertisement
Table of Contents
