How To Adjust The Computer Image - Mitsubishi Electric DLP NW30U User Manual

Adjusting projected images (continued)

How to adjust the computer image

This projector automatically selects a proper signal format according to the type of video signal supplied from the
computer. However, video signals from the computer may not be projected correctly depending on the types of the
computer and images to be projected. In such a case, make adjustment according to the fl owchart below.
When the size and position of
the computer image are not correct.
Project a bright computer image containing as many
texts and characters as possible.
Note) Disable the screen saver if it is active.
Press the AUTO POSITION button.
Settings are automatically and optimally adjusted for the input signal.
Image is projected
correctly.
Adjustment is completed.
NO
YES
Display the screen resolution setting menu of your computer.
(Example: In the case of Windows
Settings tab to display the screen resolution setting.)
resolution setting of your computer
is different from the setting of RESOLUTION
(MEMORIZE
Select RESOLUTION (MEMORIZE
Set HORIZ. PIXELS and VERT. LINES to the values of the screen resolution of your computer.
(Example: When the screen resolution of the computer is 1280x800, set HORIZ. PIXELS to 1280 and
VERT. LINES to 800.)
Select EXECUTE and press the ENTER button.
Automatic adjustment starts according to the selected resolution.
Image is projected
correctly.
After the memory saving
message is displayed,
select your desired memory
number and press the
ENTER button.
Adjust HORIZ. POSITION, VERT. POSITION, and TRACKING in the SIGNAL menu. For details,
see "Simple method to adjust the image position." (See page 38.)
Change the setting of SIGNAL DETECT in
the FEATURE menu.
Press the AUTO POSITION button.
Settings are automatically and optimally
adjusted for the input signal.
®
PC, right-click on the desktop, select Properties, and click the
The screen
) in the SIGNAL menu
of the projector.
YES
) in the SIGNAL menu and press the ENTER button.
NO
YES Perform manual
After the memory saving
message is displayed,
select your desired memory
number and press the
ENTER button.
EN-37
Image is projected
correctly.
YES
NO
adjustment.
When you don't save
YES
the adjustment result,
press the MENU button.
Adjustment is canceled.
NO
NO