Table of Contents
Advertisement
Menu operation (continued)
IMAGE menu
IMAGE
ITEM
COLOR ENHANCER
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR MANAGEMENT
COLOR
TINT
SHARPNESS
3D
3D FORMAT
3D SYNC INVERT
opt.
COLOR ENHANCER
AUTO
CONTRAST
0
BRIGHTNESS
0
COLOR TEMP.
STANDARD
COLOR MANAGEMENT
AUTO
COLOR
0
TINT
0
SHARPNESS
0
3D
ON
ADVANCED MENU
ENTER
SETTING
AUTO
PRESENTATION
STANDARD
RICH COLOR
sRGB
WHITE BOARD
USER
DYNAMIC
±30
±30
STANDARD / LOW /
HIGH
USER
AUTO
FLAT
USER
±10
±10
±5
ON
/ OFF
AUTO
SIDE BY SIDE
TOP AND BOTTOM
FRAME SEQUENTIAL
ON / OFF
IMAGE
ADVANCED MENU
INPUT LEVEL
CLOSED CAPTION
OPTICAL SENSOR
FUNCTION
Select to optimize the settings automatically depending on the input signal.
(Select this option for normal use.)
Select to make the displayed image look bright and crisp.
Select to make the displayed image look natural.
This option, suitable for viewing movies, makes the displayed image look soft
and smooth.
Select to give priority to the color reproducibility.
Reproduces natural color tones when images are projected directly onto a
white board.
Select to set the COLOR SYSTEM and GAMMA MODE. (See page 35.)
This option, suitable for viewing movies, makes the displayed image looks
vivid and bright.
Use to adjust the contrast of the projected image. (See page 34.)
Use to adjust the brightness of the projected image. (See page 34.)
Select from the predetermined color temperatures.
Use to adjust the color temperature to a desired value. (See page 34.)
Select to use the predetermined tone of each color.
COLOR MANAGEMENT doesn't work.
Select to emphasize only certain colors or to correct the tonal deviation of
only certain colors. (See page 36.)
Use to adjust the color thickness of the projected image. (See page 34.)
Use to adjust the color tint of the projected image. (See page 34.)
Use to adjust the sharpness of the projected image. (See page 34.)
Set to ON/OFF of 3D display.
Automatically distinguishes the type of the input signal and displays 3D
images when 3D image signals are inputted or 2D images (normal images)
when 2D image signals are inputted (only when the signal from the HDMI
terminal is inputted).
Select this setting when 3D images are inputted in the side by side format.
Select this setting when 3D images are inputted in the top and bottom
format.
Select this setting when 3D images are inputted in the frame sequential
format.
Switches the order of the image for left eye and for right eye.
EN-27
opt.
0
OFF
OFF
Advertisement
Table of Contents
