Mitsubishi Electric DLP NW30U User Manual page 32

Menu operation (continued)
NETWORK menu
opt.
NETWORK
PROJECTOR NAME
NETWORK
CERTIFICATION
NETWORK
PASSWORD
IP CONFIG
WIRELESS SETTING
AMX DEVICE
DISCOVERY
NETWORK RESET
NETWORK RESTART
ITEM
PROJECTOR NAME
NETWORK CERTIFICATION
NETWORK PASSWORD
IP CONFIG
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MAC ADDRESS
DHCP FUNCTION
START IP ADDRESS
END IP ADDRESS
SAVE SETTINGS
WIRELESS SETTING
SSID
CHANNEL
ENCRYPTION
SAVE SETTINGS
AMX DEVICE DISCOVERY
NETWORK RESET
NETWORK RESTART
NETWORK
IP CONFIG
DHCP
ON
ENTER IP ADDRESS
ENTER SUBNET MASK
DEFAULT GATEWAY
ENTER
MAC ADDRESS
OFF
DHCP FUNCTION
OK
START IP ADDRESS
OK
END IP ADDRESS
SAVE SETTINGS
SETTING
*****...
ON / OFF
ENTER
ENTER
ON
OFF
***.***.***.***
***.***.***.***
***.***.***.***
xx-xx-xx-xx-xx-xx
ON / OFF
***.***.***.***
***.***.***.***
OK
ENTER
********...
AUTO / 1 / 2 / 3 / 4 / 5
/ 6 / 7 / 8 / 9 / 10 / 11
OFF /
WEP 128bit(ASCII)
WEP 64bit(ASCII) /
WEP 128bit(HEX) /
WEP 64bit(HEX) /
WPA-PSK(ASCII) /
WPA2-PSK(ASCII) /
WPA-PSK(HEX) /
WPA2-PSK(HEX)
OK
OFF / ON
OK
OK
opt.
OFF
192. 168. 1. 10
255. 255. 255. 0
192. 168. 1. 10
ON
192. 168. 1. 11
192. 168. 1. 254
OK
FUNCTION
Set the name to identify the projector. Enter up to 15 characters
(alphabets or numeric characters). (See page 40.)
Select whether to enable the network certifi cation or not. Select ON
for normal use. (See page 40.)
Set the password for the certifi cation of PJLink™, ProjectorView
Global+ and remote control via LAN. (See page 40.)
Select this setting for IP Confi guration. (See page 41.)
Select this setting when you obtain IP CONFIG automatically by
DHCP server.
Select this setting when you set IP CONFIG manually.
Press the ENTER button to set IP ADDRESS. When DHCP is set to
ON, you cannot change this setting.
Press the ENTER button to set SUBNET MASK. When DHCP is set to
ON, you cannot change this setting.
Press the ENTER button to set DEFAULT GATEWAY. When DHCP is
set to ON, you cannot change this setting.
Displays MAC ADDRESS.
Use this setting when using the projector as a DHCP server.
Press the ENTER button to set START IP ADDRESS. When DHCP is
set to ON or DHCP FUNCTION is set to OFF, you cannot change this
setting.
Press the ENTER button to set END IP ADDRESS. When DHCP is
set to ON or DHCP FUNCTION is set to OFF, you cannot change this
setting.
Saves the IP CONFIG settings. When the IP CONFIG is not changed,
you cannot select SAVE SETTINGS.
Select this setting for wireless configuration. (See page 44.)
Set SSID. Enter up to 32 character alphabets (capital/small), numeric
characters, or marks.
Select the wireless channel.
Select the wireless encrypted communication.
/
Saves the WIRELESS SETTING settings. When the WIRELESS
SETTING is not changed, you cannot select SAVE SETTINGS.
Use this setting when using an AMX controller.
Resets the Network Setting. (See page 45.)
Press the ENTER button to restart the network function.
EN-32
opt.
NETWORK
WIRELESS SETTING
SSID
SSID MITSUBISHI Proje...
CH.
CHANNEL
ENCRYPTION
SAVE SETTINGS
AUTO
OFF
OK