Setting Up Your Projector - Mitsubishi Electric DLP NW30U User Manual

Setting up your projector

Before setting up
Before setting up the projector, check the operating environment.
If the environmental requirements are not satisfi ed, the projector may break down or fail.
Setting up the screen
Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the
projection angle of the projector. (See page 12.)
• Install the screen and projector so that the projector's lens is placed at the same height and horizontal position of
the screen center.
• Do not install the screen where it is exposed to direct sunlight or lighting. Light directly refl ecting on the screen
makes the projected images whitish and hard to view.
Screen size and projection distance
Refer to the following table to determine the screen size and projection distance.
• For the aspect ratio setting, see page 22.
• The fi gures in the tables are approximate and may be slightly different from the actual measurements.
• The lens shift height shows distances from the factory default position.
Screen size (16:10)
Diagonal size Width (SW) Height (SH)
inch cm inch cm inch
40 102 34 86 21
60 152 51 129 32
80 203 68 172 42
100 254 85 215 53
120 305 102 258 64
150 381 127 323 79
200 508 170 431 106
250 635 212 538 132
300 762 254 646 159
Screen
L
Projection distance (L)
Hd
Shortest (Wide) Longest (Tele)
cm inch cm inch m
54 2.6 7 49 1.2
81 4 10 74 1.9
108 5 13 99 2.5
135 7 17 124 3.2
162 8 20 149 3.8
202 10 25 187 4.7
269 13 33 250 6.3
337 16 42 312 7.9
404 20 50 375 9.5
Down side
Up side
Lens shift
height (
H)
inch m inch cm
76 1.9 3 8
114 2.9 5 12
153 3.9 6 16
191 4.9 8 20
230 5.8 10 24
288 7.3 12 30
384 9.8 16 40
- - 20 51
- - 24 61
EN-10
Screen width (SW)