Configuring Call Restriction Rules; Call Restriction And Tables - Mitel 300 Getting Started Manual

Mitel 3000
Getting Started Guide

Configuring Call Restriction Rules

Call Restriction and Tables

Call Restriction allows you to prevent specific extensions from making specific types of calls in
Day or Night Mode. To configure Call Restriction rules, you first set up the rules [CLASS
CODES] as described below and then assign the relevant rules to individual extensions.
There are four tables, that can be programmed, and six [CLASS CODES], that can be
assigned to an extension as listed below.
Type of Restriction
No restriction
Restricted from calls to codes in Table 2
Restricted from calls to codes in Tables 2 & 3
Allowed internal and emergency calls only
Allowed numbers that can be added to Tables 2 & 3
Restricted Numbers that can be added to Tables
1, 2 &3
12
Tabl CLASS Typical
e
Use
None 1 All calls
allowed
2 2 Restrict
International
calls
3 3 Restrict
National calls
None 4 Restrict all
calls
5 5 Allow these
exceptions
6 6 Restrict these
numbers also