Configuring Night & Weekend Service - Mitel 300 Getting Started Manual

Configuring Night & Weekend Service
Instruction
From the System Programming
sub menu select [System]
Scroll down and select
[Night Service]
Program night service Automatic On
& Off times
[Apply Weekend (if required)]
Select the required On Times
Enter the time to be set and then
select Confirm
Select the required Off Times
Enter the time to be set and then
select Confirm
You can apply two sets of times for the Night Service rules to be applied, typically they
Note:
are used for lunchtime and out-of-office hours.
Night Service allows you to configure different call routing plans for these time periods.
You may exit the menu at any time and the settings will be saved.
The time should be entered as 24hour time, eg 1:00pm would be entered as 1300, and
1:00am should be entered as 0100
Action
Scroll
15
Getting Started Guide
Menu Display
Select Option
-
System
-
Extensions
-
Lines
Select Option
-
Programming Position
-
Night Service
-
Music On Hold
Select Option
-
Automatic On Times
-
Automatic Off Times
-
Weekend Service
Select Option
-
On Time 1
-
On Time 2
-
Exit
Set Time [HHMM]
-
Confirm
-
Change
-
Delete
Select Option
-
Off Time 1
-
Off Time 2
-
Exit
Set Time [HHMM]
-
Confirm
-
Change
-
Delete
Mitel 3000