Mapping Incoming Calls To A Group [From A Network Line] - Mitel 300 Getting Started Manual

Mitel 3000
Getting Started Guide

Mapping Incoming Calls to a Group [From a Network line]

Instruction
From the System Programming
sub menu select [Lines]
Select
[Incoming Ringing]
Select the line for which this rule
applies
Select the time when this rule
should apply
Select the destination for incoming
calls on this line [ Group in this
example]
Select the group which is to receive
incoming calls on this line during the
relevant time period
Note: You can map incoming calls on individual lines to be presented to different destinations
(Groups, Extensions, Auto Attendant or Courtesy Service) in day and night modes.
10
Action
Scroll
Scroll
Menu Display
Select Option
-
System
-
Extensions
-
Lines
Select Option
-
Equipped Lines
-
Group Programming
-
Incoming Ringing
Select Line
-
Line 1
-
Line 2
-
Door Phone
Select Option
-
Day Mode
-
Night Mode
-
Day And Night Mode
Select Destination
-
Extension
-
Group
◊ Auto Attendant
Select Group
◊ Group 1 Group 4 ◊
◊ Group 2 Group 5 ◊
◊ Group 3 Group 6 ◊
[To select a group(s), select the
diamond next to it ]