Changing the DND Settings
See "Using Do-Not-Disturb (DND)" on
To turn on DND using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
To turn off DND using Remote Programming:
Changing the Manual Call Forwarding Settings
See "Manual Call Forwarding" on
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
5. Dial one of the following Call Forwarding feature codes:
6. Enter either an extension number or (8) followed by a phone number.
To turn off Call Forwarding using Remote Programming:
Mitel
®
5312/5324 IP Phone User Guide – Issue 2, June 2010
•
Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
•
Use any phone on the system.
Station password for your extension.
text (if applicable).
Follow steps 1. through 4. above, and then dial 371.
•
Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
•
Use any phone on the system.
Station password for your extension.
•
355 (All)
•
356 (No answer)
•
357 (Busy)
•
358 (No Answer/Busy)
Dial 355, and then hang up.
page 53
for more information about using DND.
page 45
page 38
for more information about Manual Call Forwarding.
page 45
Call Features
for details on setting up a
for details on setting up a
Page 49