Cleaning And Replacing The Filters - Meridian 810 User Manual

48
Maintenance

Cleaning and replacing the filters

Turn off the power of the projector unit, and unplug the
power cord when cleaning or replacing the filters.
Clean the filters regularly. If the filters are soiled, air
intake efficiency may deteriorate, thus resulting in
malfunction of the product.
Replace each filter with a new one if the filter fails to
remove dust thoroughly or if it is damaged.
Side filter
Front filter
Filter Panel
Failure to do so may cause dust to enter the projector
and shadows to appear on the projected image.
The filters and associated components are supplied in
the 810 Service Kit, part number SP7015AA.
If dirt has entered this product please consult your
authorised Meridian retailer.
Filter
Sponge
Filter cover
Front View of Filter Panel
Filter Cover
Rear View of Filter Panel
Filter Bracket
CAUTION: Remove the
four screws on the inner
side (these fasten the filter
cover).
Filter
Sponge
Honeycomb