Connections - Meridian 810 User Manual

Connections

Infra-red
repeater
Trigger 3
IR Trigger
IN Output
DVI Output 4 DVI Output 3
Quad DVI outputs
to projector
Video connections
Use this connection
DVI Outputs 1 to 4
HDMI Input
DVI Input
The video connections should be made with HD-quality
DVI to DVI, HDMI to HDMI, or DVI to HDMI cables.
Meridian recommends cable lengths no longer than 27
feet (8m) using standard cable. For longer cable runs,
an external equalizer/extender and good quality cable is
recommended.
Please consult Meridian if optical fibre DVI links are
to be used to verify we can meet the cable power
specifications.
if you need the audio on your HDMI source, ie HDMI
carries both, then you need a Meridian HD621 HDMI
Audio Processor to split the audio off to drive a
Meridian processor?
Trigger
outputs
Trigger 1
Trigger 2
Ethernet
Sled Actuate Sled Power
DVI Output 2 DVI Output 1
Ethernet
To connect to this
The corresponding DVI 1 to DVI 4 inputs on the 810 D-ILA Projector, using DVI cables.
The HDMI output of a video source, such as a Meridian G95 DVD Surround Receiver
System, using an HDMI cable. The sound channel is ignored.
The DVI output of a video preamplifier or video source, using a DVI cable.
Meridian RS232
Comms control
DVI Input HDMI Meridian USB RS232
Input Comms Host Control
RS232
Projector
DVI HDMI USB RS232
input input to projector
23
Installing the 810
Scaler