Connecting Up - Meridian 810 User Manual

Connecting up

To connect to the 810 D-ILA Projector
810 Scaler
VIDEO OUTPUTS
DVI 4 DVI 3 DVI 2 DVI 1
• Connect the DVI Outputs 1 to 4 from the 810 Scaler
to the DVI 1 to DVI 4 inputs on the 810 D-ILA
Projector, using DVI leads, ensuring that you link
connectors with matching numbers.
To connect to a video source
G95 DVD Surround Receiver System
HDMI
OUTPUT
• Connect the HDMI output from the video source to
the HDMI input on the 810 Scaler, using an HDMI
lead.
Alternatively, if the video source provides a DVI output,
use the DVI input on the 810 Scaler.
RS232
PROJECTOR
RS232-C
RS232 lead
DVI leads
•
MERIDIAN
COMMS
HDMI lead
•
•
810 D-ILA Projector
VIDEO INPUTS
DVI 4 DVI 3 DVI 2 DVI 1
Connect the RS232 Projector connector on the 810
Scaler to the RS232-C connector on the Projector,
using an RS232 Male-Male Null Modem Cable.
810 Scaler
MERIDIAN
HDMI
COMMS
INPUT
COMMS lead
If the video source is a Meridian product, such as
a G95 DVD Surround Receiver System, connect
together the COMMS sockets using the Comms lead
provided with the other product.
Configure the source to use the appropriate input;
see Configuring the sources , page 34.
25
Installing the 810
Scaler