Meridian 810 User Manual page 5

EMC supplement
• This equipment is in conformity with the provisions
and protection requirements of the corresponding
European Directives. This equipment is designed for
professional projector applications and can be used in
the following environments.
Controlled EMC environment (for example purpose
built broadcasting or recording studio), and the
rural outdoors environment (far away from railways,
transmitters, overhead power lines, etc).
In order to get the best performance and for
electromagnetic compatibility we recommend using
cables not exceeding the length indicated below.
Longer cables may be used with clip-on ferrite
assemblies. For exceptionally long runs, use optical DVI
cabling.
Cables Type
Power cord Power supply cord
DVI (X4) Cable Shielded cable
USB Cable Shielded cable
LAN Cable Shielded cable
RS-232C Cable Shielded cable
The current consumption of this apparatus is 9.705A at
115v; 4.35A at 230v.
WARNING
This is a Class A product. In a domestic environment
this product may cause radio interference in which case
the user may be required to take adequate measures.
In case where the strong electromagnetic waves or
magnetism are near the signal cable, the picture will
contain noise. In such cases, please keep the cable
away from the sources of the disturbance.
Length
3.0m
5.0m
2.0m
2.0m
1.6m
v
Preface