Installing The Projector And Screen - Meridian 810 User Manual

Installing the projector and screen

It is recommended that this projector be installed at
right angles to the screen. You can shift the projection
screen position vertically and horizontally with some
optional lenses available for this projector as shown
below. (See lens documentation)
When upward shift amount is up to
50% (Lens S only)
Install the projector so that the lower end of the
projection screen is at the same height as the centre of
the lens.
Screen
90 90 90
Centre line of lens
When there is no upward/downward
shift
Install the projector such that the center of the
projection screen is at the same height as the centre of
the lens.
Screen
90 90 90
Centre line of lens
When downward shift amount is up to
50% (Lens S only)
Install the projector such that the upper end of the
projection screen is at the same height as the centre of
the lens.
Centre line of lens
Screen
90 90 90
When shift amount to the right is up to
25% (Lens S only)
Install the projector such that the centre of the lens is
aligned with the Q r position from the left edge of the
screen.
15
Installing the 810
Projector