Controller Assignments (Control); Bender Settings (Bend/Hold Screen) - Roland SuperNATURAL BRASS ARX-03 Owner's Manual

Controller Assignments (CONTROL)

Here you can assign controllers to switch between Unison mode and
Stack mode, or to switch between performance variations.
For example, you could use a pedal to switch between Unison mode
and Stack mode.

Bender settings (Bend/Hold screen)

Here you can specify bender range for each instrument.
.
Settings for each instrument
Parameter
Play/Standby
Bend Range Up
38
From Main Screen
F7>F3
(on the Fantom-G)
Value Description
PLAY,
Turns the sound of each player on/off.
STANDBY
Specifies the amount of pitch change for
BendUp
0–12 This setting is in semitone steps (valid when
Bender Mode is "NORMAL," "LOCK1" or
"LOCK2").
Parameter Value
Specifies the amount of pitch change for
BendDown
Bend Range Down 0–12 This setting is in semitone steps (valid when
Bender Mode is "NORMAL," "LOCK1" or
"LOCK2").
* For the SuperNATURAL brass (BRASS) sounds, setting the bend
range (RANGE) to 3 or higher will simulate the discontinuous
pitch change that is typical of brass instruments, instead of the
normal smooth pitch change. When you apply a downward
bend, the sound will behave in the manner distinctive of brass
instruments, meaning that the volume will also decrease.
Settings for each patch
Parameter Value
Specifies what happens when you operate the
bender
NORMAL: Normal operation
LOCK1:
Bend will apply only to the first-played key.
LOCK2:
NORMAL,
No change will be produced by returning the
LOCK1,
Bender Mode
bender.
LOCK2,
COMBI:
COMBI
This mode allows you to express the subtle pitch
changes that are distinctive of a brass instrument.
The proportion of breath noise will increase
when you operate the bender in the Down
direction.This lets you freely control the
breathiness at the beginning or end of a note.
Description
Description