Tape Echo - Roland SuperNATURAL BRASS ARX-03 Owner's Manual

10: TAPE ECHO

A virtual tape echo that produces a realistic tape delay sound. This
simulates the tape echo section of a Roland RE-201 Space Echo.
fig.MFX35
L in
Tape Echo
R in
48
L out
Direct Level
Echo Level
Echo Level
R out
Direct Level
Parameter Value
S, M, L, S+M,
Mode S+L, M+L,
S+M+L
Repeat Rate # 0–127
Intensity # 0–127
Bass -15– +15
Treble -15– +15
Head S Pan
Head M Pan L64–63R
Head L Pan
Tape Distortion 0–5
Wow/Flutter Rate 0–127
Wow/Flutter
0–127
Depth
Echo Level # 0–127
Direct Level # 0–127
Level 0–127
Description
Combination of playback heads to use
Select from three different heads with
different delay times.
S: short
M: middle
L: long
Tape speed
Increasing this value will shorten the
spacing of the delayed sounds.
Amount of delay repeats
Boost/cut for the lower range of the echo
sound
Boost/cut for the upper range of the echo
sound
Independent panning for the short,
middle, and long playback heads
Amount of tape-dependent distortion to
be added
This simulates the slight tonal changes
that can be detected by signal-analysis
equipment. Increasing this value will
increase the distortion.
Speed of wow/flutter (complex variation
in pitch caused by tape wear and
rotational irregularity)
Depth of wow/flutter
Volume of the echo sound
Volume of the original sound
Output level