Reverb Settings (Reverb Screen) - Roland SuperNATURAL BRASS ARX-03 Owner's Manual

Reverb settings (Reverb screen)

In the Effects/Reverb screen you can specify the type of reverb and
how it will sound.
36
Reverb Type
From Main Screen
F6>F6
(on the Fantom-G)
Reverb Switch
Type: 1 (ROOM)/ 4 (STUDIO)
Pre Delay
Time
Low Damp Freq
Low Damp
High Damp Freq
High Damp
High Cut Freq
Type: 2 (HALL)/ 3 (PLATE)/5 (CHURCH)
Pre Delay
Parameter Value
00 (OFF),
01 (ROOM),
02 (HALL),
03 (PLATE),
04 (STUDIO),
05 (CHURCH),
06 (SRV ROOM),
07 (SRV HALL),
08 (SRV PLATE)
OFF, ON
0–100 ms
0.1–3.0 sec.
20–1000 Hz
1–100%
1000–10000 Hz
1–100%
1000–10000 Hz
0–100 ms
Description
Reverb type
Turns the reverb on/off
Delay time from the original
sound until the reverb is heard
Time over which the reverb
sound decays
Frequency below which the low
range of the reverb sound will be
dampened
Amount of attenuation for LF
damp
(100%: no effect)
Frequency above which the high
range of the reverb sound will be
dampened
Amount of attenuation for HF
damp
(100%: no effect)
Frequency above which the high
range of the final output sound
will be cut
Delay time from the original
sound until the reverb is heard