Connecting Externalspeakers Or An External Reverb Unit To Broaden The Reverb (Rss Reverb); Switching The Aux Out Mode; Switching The Aux Out On/Off - Roland 60S Owner's Manual

Max Max Max Max
Min Min Min Min
Connecting External
Speakers or an external
Reverb Unit to Broaden the
Reverb (RSS Reverb)
The AT-90S/80S has an Aux Out jack on the bottom of the
instrument.
By using this Aux Out jack to connect external speakers, you
can sound the reverb (reverberation) from the speakers. An
external reverb unit can also be connected and used to apply
reverb.

Switching the Aux Out Mode

1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch the Aux Out Mode setting to switch
between "AMBIENCE" and "TO EFFECTOR."
Each time you touch the TV Format setting, it will
alternate between "AMBIENCE" and "TO EFFECTOR."
The reverb sound applied by the
AMBIENCE
ATELIER will be output.
TO Direct (unprocessed) sound for pro-
EFFECTOR cessing by reverb will be output.
3.
Touch <Exit>.
You can change the depth of Reverb for each part (p. 117).
This setting remains stored in memory even while power is
turned off.
Harmony Intelligence
Chapter 10 Connecting with External Device

Switching the Aux Out On/OFF

1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch the Aux Out setting to switch between
"ON" and "OFF."
Each time you touch the Aux Out setting, it will alternate
between "ON" and "OFF."
3.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
185