Setting The Pc Number; Midi In Mode - Roland Music Atelier AT-45 Owner's Manual

■ Setting the PC Number

You can specify the Program Change number that will be
transmitted from MIDI Out when a Registration is selected.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Bank MSB
(Bank Select MSB), Bank LSB (Bank Select LSB),
or PC Number (Program Change Number).
3.
Touch either <Bank MSB>, <Bank LSB>, or <PC
Number> setting.
4.
Touch < >< > to change the setting.
Menu
Bank MSB
Bank LSB
PC Number
5.
Touch <Exit>.
Setting
0–127
0–127
1–128
Chapter 10 Various Other Settings

■ MIDI IN Mode

This instrument contains two sound generators: one for
GM2/GS data playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control
only the sound generator for GM2/GS data playback.
However by changing the MIDI IN Mode setting, you can
also control the keyboard sound generator from MIDI In.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the MIDI IN Mode.
3.
Touch the MIDI IN Mode setting to switch
between "MODE 1" and "MODE 2."
Each time you touch the MIDI IN Mode setting, it will
alternate between "Mode 1" and "Mode 2."
Control the instrument as a GS sound
MODE 1
generator
Channels 5 through 10 and Channels 12, 14,
15 are transmitted to the GS sound
MODE 2 generator, and all other channels are
transmitted to the keyboard sound
generator.
Channel MODE 1
1 GS
2 GS
3 GS
4 GS
5–10 GS
11 GS
12 GS
13 GS
14–15 GS
16 GS
MODE 2
Solo
Pedal/GS*
Lower
Upper
GS
Drum/SFX
GS
Nothing
GS
Control
179