Saving Registration Sets To A Floppy Disk - Roland Music Atelier AT-45 Owner's Manual

Chapter 3 Using the Registration Buttons
Saving Registration Sets to a Floppy
Disk
With the settings of Registration buttons [1]–[8] considered as one set, a
single floppy disk can store up to 99 sets of data. We recommend that
complex panel settings or Registrations you wish to keep be saved on disk.
If AT-45 Furthermore, when you save registrations created on the AT-45 to
floppy disks, you can call up their settings on other Atelier Series
instruments and use the registrations the same way.
1.
Make sure that the disk drive contains a disk that was
formatted (p. 86) by the AT-45.
2.
Touch <Registration> on the Main screen.
The sub-window appears.
fig.03-04_55
3.
Touch <Save>.
The Registration Save screen appears.
fig.03-09_55
88
When you touch <go to
Load>, the instrument
jumps to the Registration
Load screen.
If you wish to assign a
name before you save, refer
to "Assigning a Name to a
Registration Set" (p. 84)