Setting The Pc Number; Midi In Mode - Roland 60S Owner's Manual

Max Max Max Max
Min Min Min Min

Setting the PC Number

You can specify the Program Change number that will be
transmitted from MIDI Out when a Registration is selected.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch either <Bank MSB>, <Bank LSB>, or <PC
Number> setting.
3.
Touch < >< > to change the setting.
Menu
Bank MSB
Bank LSB
PC Number
4.
Touch <Exit>.
Harmony Intelligence
Setting
0-127
0-127
1-128
Chapter 9 Various Other Settings

MIDI IN Mode

This instrument contains two sound generators: one for SMF
data playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control
only the sound generator for SMF data playback. However
by changing the MIDI IN Mode setting, you can also control
the keyboard sound generator from MIDI In.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the MIDI IN Mode.
3.
Touch the MIDI IN Mode setting to switch
between "MODE 1" and "MODE 2."
Control the instrument as a GS sound gener-
MODE 1
ator
Channels 1-8 and channel 10 will be sent to
the GS sound generator, and channel 9 and
MODE 2
channels 11-16 will be sent to the keyboard
sound generator.
173