Connecting A Computer - Roland Music Atelier AT-45 Owner's Manual

Connecting a Computer

You can connect between your computer and the MIDI
connector of the AT-45 using a Roland UM-1 or similar USB
MIDI interface cable (sold separately).
If the AT-45 is connected to a computer in which sequencer
software such as EDIROL's "Visual MT" is installed, a song
you've recorded on the AT-45 can be saved on your
computer.
Connection examples
NOTE
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
* In order to make connections to your computer, you must
install "MIDI driver" software on your computer. For details,
refer to the owner's manual for your MIDI interface.
Use a USB MIDI interface cable to connect the USB
connector of your computer to the MIDI connectors of
the AT-45.
UM-1 etc.
MIDI IN MIDI OUT
USB Connector
of your Computer
Computer
Bottom of the AT-45
Chapter 11 Connecting with External Device
187