Roland Music Atelier AT-45 Owner's Manual page 87

4.
Touch <Save>.
The Registration Save screen appears.
fig.03-09_55
5.
Touch <Utility>.
The Utility screen appears.
6.
Touch <Format Disk>.
The Format Disk screen appears.
fig.
If you touch <Cancel>, you will return to the Registration Save screen
without formatting.
7.
Touch <OK> to start formatting.
While formatting is in progress, the following display appears.
fig.
When the format is finished, the Registration Save screen returns.
Chapter 3 Using the Registration Buttons
When you touch <go to
Load>, the instrument
jumps to the Registration
Load screen.
NOTE
Never attempt to remove
the floppy disk until
formatting is complete.
87