Roland Music Atelier AT-45 Owner's Manual page 157

4.
Touch <Quantize>.
fig.08-17-2_50
The Quantize screen appears.
fig.08-17_50
5.
Touch the "Track" value (the track that will be
quantized).
6.
Touch < >< > to specify the "Track" (the
track that will be quantized).
fig.08-18_50
Settings ALL, RHYTHM, ACCOMP, BASS, LOWER,
UPPER, SOLO
If you select "ALL," the recording in all the tracks will be
quantized.
7.
When you're done making the settings, touch
<Exit>.
8.
Touch the "From" value (the measure at which
quantization will begin).
9.
Touch < >< > to set "From" (the measure at
which quantization will begin).
Chapter 8 Editing Your Musical Performance Data
10.
When you're done making the settings, touch
<Exit>.
11.
Touch the "For" value (the number of measures
that will be quantized).
12.
Touch <
measures that will be quantized).
To specify everything through to the last measure, set
"for: ALL."
13.
When you're done making the settings, touch
<Exit>.
14.
Touch the "Resolution" value (the resolution at
which notes will be aligned).
15.
Touch the settings to select "Resolution" (the
resolution at which notes will be aligned).
The "Resolution" (the timing to which notes are aligned)
can be set to one of the following settings.
fig.08-20
Half note
8th note
16 note triplet
16.
When you're done making the settings, touch
<Exit>.
17.
Touch <Execute>.
The following display appears.
fig.08-06
To cancel operation, touch <Cancel>.
18.
Touch <OK> to have the quantization carried
out.
When the quantizing is finished, you are returned to the
Quantize screen.
>< > to set "For" (the number of
Quarter note Quarter note triplet
8th note triplet 16th note
32th note
157