Setting The Pc Number; Midi In Mode - Roland Music ATELIER AT500 Owner's Manual

Various Other Settings

Setting the PC Number

You can specify the Program Change number that will be
transmitted from MIDI Out connector when a Registration is
selected.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < > < > to display the Bank MSB
(Bank Select MSB), Bank LSB (Bank Select LSB),
or PC Number (Program Change Number).
fig.00-37.eps
3.
Touch either <Bank MSB>, <Bank LSB>, or <PC
Number> setting.
fig.09-28.eps
4.
Touch < > <
Menu
Bank MSB
Bank LSB
PC Number
5.
Touch <Exit>.
212
> to change the setting.
Setting
0–127
0–127
1–128

MIDI IN Mode

This instrument contains two sound generators: one for GM2/
GS data playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control
only the sound generator for GM2/GS data playback.
However by changing the MIDI IN Mode setting, you can also
control the keyboard sound generator from MIDI In.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < > < > to display the MIDI IN Mode.
fig.09-24.eps
3.
Touch the MIDI IN Mode setting to switch
between "MODE 1" and "MODE 2."
Each time you touch the MIDI IN Mode setting, it will
alternate between "Mode 1" and "Mode 2."
Setting
MODE 1
Control the instrument as a GS sound generator
Channels 5 through 10 and Channels 12, 14, 15
are transmitted to the GS sound generator, and all
MODE 2
other channels are transmitted to the keyboard
sound generator.
Channel MODE 1
1 GS
2 GS
3 GS
4 GS
5–10 GS
11 GS
12 GS
13 GS
14–15 GS
16 GS
Description
MODE 2
Solo
Pedal/GS *
Lower
Upper
GS
Drums/SFX
GS
Manual Percussion
GS
Control