(2) Protocol menu
For each parallel channel and port in the Protocol menu, select the PDL
numbers in "PDL SELECT" as listed below. When the Protocol menu is
changed, system reset is executed.
Menu name
Port number : Protocol name
——PORT 1 :XPT
——PORT 2 : LPD
Protocol
——PORT 3 : FTP
——PARALLEL
Note:
You can set the ports you use in Ethernet parameters in System menu (initial
parameter is 3 ports).
(3) System menu
Set the number of ports you use and the protocol types in System menu
listed below:
Menu
name
——COMM. PARAM.
System
Note:
FTP, XPT, and LDP comprehensively allow for 10 ports to be set.
Initial parameter is 1 port for each protocol. (XLF)
Setting example: # PORT SELECT 1-10
:
:
——ETHERNET ——PORT SELECT
——PARALLEL ——TIMING MODE
——USB
——TIMEOUT (sec)
> F F F X X X L L L – ....... In case of 3 ports for each protocol
▼Setting menu
——PDL SELECT
——XPT PORT
——PDL SELECT
——PRINTER NAME
——PDL SELECT
——USER NAME
:
:
——PDL SELECT
——XLF
:
(Refer to "Note" below.)
:
3-7