■LINE DISPOSAL
<Parameter (choice input method)>
OFF :
ON :
Allows for setting of the end shape of fine small lines and their joining
method.
Line end shapes other than round one are treated.
All ends of fine small lines are treated as round shape.
• With this device, lines less than 1mm (0.039 inches) in width and
length are handled as micro-length lines.
• Fine small lines may not be clearly plotted in combinations other than
CORNER = "ROUND" and JOINT = "ROUND".
By setting the parameter to "ON", the lines are handled as CORNER
= "ROUND" and JOINT = "ROUND" allowing clear plotting.
▼Setting parameter items
: Default value
5-33