Seiko I Infotech LP-1020 User Manual page 146

Manual feed + two-step roll model
Paper type No.
4 and above
When handling paper type No. as a paper supply type, paper supply is controlled as
listed below.:
Paper type No.
4 and above
Note) This setting is meaningless in applications not supporting the paper type No.
5-28
Sets paper type No. = disable. Supplies paper according
0
to the panel paper supply mode setting.
Controls paper supply in the paper supply mode = roll 1
1
mode.
Controls paper supply in the paper supply mode = roll 2
2
mode.
Controls paper supply in the paper supply mode =
3
manual feed mode.
Controls paper supply in the paper supply mode = roll 1
mode.
Sets paper type No. = disable. Supplies paper according
0
to the panel paper supply mode setting.
1 Plot is produced on the normal paper.
2 Plot is produced on the tracing paper.
3 Plot is produced on the film.
Sets paper type No. = disable. Supplies paper according
to the panel paper supply mode setting.
Paper supply control
Paper supply control