■FTP DATA TYPE
<Parameter (choice input method)>
ASCII/BIN/BIN
■SNMP
<Parameter (choice input method)>
ON/OFF
■SNMP VERSION
<Parameter (choice input method)>
V1/V2
■TRAP** (** : 01 - 02)
●MANAGER
<Parameter (numerical input method)>
000.000.000.000 to 255.255.255.255
Default value: 000.000.000.000
(TRAP is the same when it is OFF if not registered.)
12-10
Specifies the initial value of the data transfer type when receiving ftp data.
Specifies the SNMP operation. When the setting is ON, SNMP is enabled.
The SNMP community name can be specified using the Web name.
Specifies the SNMP version.
Specifies the manager IP address to return TRAP.
When the following TRAP conditions are OFF, TRAP does not occur in
this setting.
: Default value
: Default value
: Default value