Seiko I Infotech LP-1020 User Manual page 54

2-12
If an error message about paper supply appears on LCD, paper of larger
size than required (or, if a type of paper is specified, paper of different
type) can be chosen for printing.
e.g.
S E T P A P E R
A 1
F O R C E P R I N T ?
P R I N T
F 0 1 H P G L
*Prints only when paper of larger size than required is available or if
paper of a different type is available.
*Alternative print is disabled, if printing on the manually fed paper.
◆"A1" in the above example indicates the paper roll width and
its indication changes as follows:
Example:
A series:
9" series:
8.5" series:
30x42 series:
MAP series:
DIN series:
Chinese series:
◆When a paper type is specified as "SET PAPER A0
(TRACE)" and the paper roll is loaded, the display may be
automatically switched to the paper menu. In such a case,
set the type of the paper roll.
◆If the media series is different (that is, appropriate media series
was not loaded into the tray), the display may be automatically
switched to the paper menu when the paper roll is reloaded. In
such a case, set the media series of the paper roll.
Press the key.
Press the key.
0 1 / 0 1 ✽ S 0 0 1
J 0 0 9
Notes
"A0", "A1", "A2", "A3"
"36"", "24"", "18"", "12""
"34"", "22"", "17"", "11""
"30""
"707 mm", "500 mm"
"707 mm", "500 mm"
"914 mm", "620 mm", "450 mm"
"310 mm","297 mm"