Synchronizing With An Ea-1Mkii Or Er-1Mkii - Korg Electribe SmkII Owner's Manual

3. Basic operation (Quick Start)
Synchronizing with an EA-1
By synchronizing the ES-1
EA-1 II or ER-1
mk
sibilities. Here we will explain how you can make the EA-1
play back in synchronization with the tempo of the ES-1
Use MIDI cables to connect the MIDI OUT connector of
the ES-1
mk
and the MIDI THRU connector of the EA-1
IN connector of the ER-1
jacks of the ES-1
of the EA-1
(speakers with built-in amp).
1. Press the Global mode key to enter Global mode.
2. Use the cursor keys [▲ ][▼ ] to make the parameter se-
lect LED indicate CLOCK.
3. Set the ES-1
to "E t" (☞ p.38 "Synchronizing the ES-1
external MIDI device").
4. Press the Play/Pause key of the ES-1
pattern or song (the Play/Pause key will light). The
EA-1 II and ER-1
mk
synchronization with the tempo of the ES-1
If you want the ES-1
make the following settings.
• Set the ES-1
• Select the same MIDI channel for the ES-1
select "01" for all three.)
• On the EA-1
1 and ER-1 owner's manuals.)
• On the ES-1
that no conflict occurs. (☞ p.54 "MIDI note number settings for each part (Note No.)").
*This will prevent the EA-1
when note- on messages are transmitted.
Another easy way to obtain synchronized playback is to connect the ES-1
quencer or synthesizer that can transmit and receive MIDI Clock messages.
26
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
II with other ELECTRIBE models such as the
mk
II, you can obtain an even wider range of expressive pos-
mk
II to the MIDI IN connector of the EA-1
II. Also connect the line out
mk
II and ER-1 II, and the part out jacks
mk mk
II, to your mixer or powered monitors
mk
II to "Int" and the EA-1
mk
II will play the pattern or song in
mk
ES-1
mk
II to play the identically-numbered pattern in synchronization,
mk
II to "int" (master), and the EA-1
mk
II and ER-1 II, set the MIDI Filter parameter "P" to "O." (☞ the EA-
mk mk
II, set the MIDI Note Number parameter to C-1—A-1 or A 8—G9 so
mk
II and ER-1
mk
II or ER-1 II
mk mk
mk
II.
mk
II,
mk
II to the MIDI
mk
II and ER-1 II
mk mk
II with an
mk
II to start the
mk
II.
mk
EA-1
II
!
"
II and ER-1
mk
II, EA-1 II, and ER-1
mk mk
II from being sounded unintentionally
mk
II and ER-1 II
mk
ES-1 II
mk
MIDI OUT
MIDI cable
EA-1 II
mk
MIDI IN
MIDI THRU
MIDI cable
ER-1 II
mk
MIDI IN
II ER-1
mk !
II to "E t" (slave).
mk
II. (For example,
mk
II to a se-
mk
Powered monitor
Powered monitor
II
mk
!