Resampling From The Middle Of A Pattern Or Song; Resampling Just One Note Of A Part - Korg Electribe SmkII Owner's Manual

Rhythm production sampler
Table of Contents

Advertisement

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
When you turn on the power (i.e., in the default state), sam-
pling will be monaural.
If you press the Play/Pause key during resampling, sampling
will continue but the pattern or song playback will be paused.
Resampling from the middle of a
pattern or song
1. Make sure that you are in Pattern mode or Song mode.
2. Press the Stop/Cancel key to stop playback.
3. Press the Play/Pause key to begin playback of the pattern or
song. (The Play/Pause key will light.)
4. At the instant that you wish to begin sampling, press the Rec
key while holding down the PATTERN SET key. (The PAT-
TERN SET key, Rec key, and the Play/Pause key will light.)
5. If you press the Stop/Cancel key, sampling will stop. (The PAT-
TERN SET key, Rec key, and Play/Pause key will go dark.) Al-
ternatively if you press the Rec key without pressing the Stop/
Cancel key, sampling will stop but playback will continue. (The
PATTERN SET key and Rec key will go dark, and the Play/
Pause key will be lit.)
1
4
5
The sampling method (monaural/stereo) will be as specified
by the setting described earlier in "Resampling from the be-
ginning of a pattern or song."
If you press the Play/Pause key during resampling, sampling
will continue but the pattern or song playback will be paused.
3

Resampling just one note of a part

1. Make sure that you are in Pattern mode, Song mode, or Sample
mode.
2. Press the Stop/Cancel key to stop playback.
3. Hold down the Pattern Set key and press the Rec key to enter
sampling-ready mode. (The Rec key will light, and the Pattern
Set key and Play/Pause key will blink). The display will blink
to indicate the sampling method (monaural/stereo).
4. Rotate the dial to select monaural ("
5. Press the key for the part that you wish to sample. The part you
pressed will sound, and at the same time, sampling will begin.
(The Pattern Set key, Rec key, and Play/Pause key will light.)
6. Press the Stop/Cancel key when you want to stop sampling.
(The Pattern Set key, Rec key, and Play/Pause key will go dark.)
If you wish to cancel sampling-ready mode, press the Stop/Can-
cel key before you start sampling.
1
3
2,6
4. Sample mode
n
no") or stereo ("StE").
4
5
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Electribe es-1 mkii

Table of Contents