Table of Contents
Advertisement
before the machine containing the source tracks. This is because the source
machine will block the output of the 1212 I/O, in favor of its own output.
For instance, let's say that you have a three-ADAT system, with the
1212 I/O at the end of the ADAT chain. If the source tracks are on ADAT
#2, you can record the S/PDIF output onto ADAT #1, but not onto ADAT
#3. If the source tracks are on ADAT #3, you can record the S/PDIF output
onto either ADAT #1 or ADAT #2.
Bouncing ADAT tracks
You can use the 1212 I/O Utility to bounce audio from one ADAT track to
another–for instance, from tracks 1 and 2 to tracks 3 and 4.
1.
2.
3.
For more information, please see "Setting the word clock source on an
ADAT system" on page 19.
If you are using the Alesis BRC, read the instructions under "Using the
Alesis BRC: 1212 I/O output to ADAT input," on page 36.
Synchronizing to ADAT timecode
The 1212 I/O provides rock-steady, drift-free ADAT audio and timecode
synchronization. When used with compatible digital audio software, this
creates a non-linear editing system directly integrated into your ADAT
system–which can also operate as an additional, ADAT-compatible
multitrack.
To set up your digital audio software for ADAT timecode synchronization:
1.
See your digital audio software's manual for more information.
2.
For more information, please see "Setting the word clock source in digital
audio software" on page 16 for more information.
3.
For more information, please see "Setting the word clock source on an
ADAT system" on page 19.
When using a BRC and/or ADAT XTs, you may also set the ADAT word
clock to Digital, and the 1212 I/O to S/PDIF•Word Clock. See "Special
Korg 1212 I/O
In the 1212 I/O Utility, set the desired ADAT inputs to the desired
ADAT outputs.
Set the 1212 I/O's Clock Source to ADAT.
Set the ADAT system's word clock to Internal.
Select the 1212 I/O as the audio input and output hardware, as well
as the timecode source.
In the digital audio program, set the 1212 I/O's word clock source to
ADAT.
Set the ADAT system's word clock to Internal.
Applications
35
Advertisement
Table of Contents
