Saving A Pattern (Write) - Korg Electribe SmkII Owner's Manual

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Saving a pattern (WRITE)

If you wish to keep the pattern data that you create, you must per-
form this Write operation. When you perform the Write operation,
"Data Copy within a pattern" (p.44) will occur automatically, de-
pending on the pattern length.
If you intentionally want to discard your edits and revert to the
original pattern data, simply select a different pattern without Writ-
ing.
1. If the pattern is playing, press the Stop/Cancel key to stop play-
back. Use the cursor keys to make the parameter select LEDs
indicate PA TTERN.
2. Press the WRITE key once (the key will blink). The pattern num-
ber will blink in the display.
3. Rotate the dial to select the writing destination pattern number.
4. Press the WRITE key once again to write the data.
To cancel, press the Stop/Cancel key.
If the Global mode Memory Protect setting is on, it will not
be possible to W rite. In this case, you must turn of f the Glo-
bal mode Memory Protect setting before you execute the
Write operation.
Never turn of f the power during the W rite operation. This can
damage the data.
3
2,4
5. Pattern mode
47