Table of Contents
Advertisement
SERVICE MANUAL
23JUL01
SM5766-1
Page
15 of 96
Removal for the THERMAL FUSE ASSEMBLY
Warning
Dangerous Voltage
1
Disconnect the main power.
2
Do the removal for the LOWER HOUSING ASSEMBLY.
3
Disconnect the 3 CONNECTORS on the MAIN BOARD. It is not necessary to disconnect
the CONNECTOR next to the LOWER LIGHT BAFFLE ASSEMBLY.
4
Lift the MAIN BOARD up.
5
Cut and remove the necessary WIRE TIES.
6
Remove the brown wire from the THERMAL FUSE ASSEMBLY on the POWER SWITCH.
7
Remove the brown wire from the INTERLOCK SWITCH on the LOWER LIGHT BAFFLE.
8
Loosen the Torx SCREW on the PREHEAT DUCT approximately half way.
FAN BELT
MECHANISM BELT
Removals and Installations
A091_4015BCA
A091_4015BA
Hide quick links:
Advertisement
Table of Contents
