Removal For The Lens Mount Assembly - 1500 And 2000 Projectors Only - Kodak Ektalite 500 Service Manual

SERVICE MANUAL
23JUL01
Removal for the LENS MOUNT ASSEMBLY - 1500 and
SM5766-1
Page
2000 PROJECTORS Only
32 of 96
A091_4024GCA
A091_4024GA
SCREW (3)
LENS
MOUNT
ASSEMBLY
Warning
Dangerous Voltage
1 Disconnect the main power.
2 Do the removal for the LOWER
HOUSING ASSEMBLY.
3 Disconnect the 3 CONNECTORS on
the MAIN BOARD. It is not necessary to
disconnect the CONNECTOR next to
the LOWER LIGHT BAFFLE
ASSEMBLY.
4 Lift the MAIN BOARD up.
5 Remove the FOCUS KNOB.
6 Remove the short, gray wire connected
to the AUTO-FOCUS DEFEAT
SWITCH.
Important
It is necessary to push the AUTO-FOCUS
BRACKET backward and forward to allow
access to the SCREWS on the LENS
MOUNT ASSEMBLY.
7 Remove the 3 SCREWS from the LENS
MOUNT ASSEMBLY.
8 Lift and remove the LENS MOUNT
ASSEMBLY.
Removals and Installations