Removal For The Motor - Kodak Ektalite 500 Service Manual

SERVICE MANUAL
23JUL01

Removal for the MOTOR

SM5766-1
Page
11 of 96
Warning
Dangerous Voltage
1 Disconnect the main power.
2 Do the removal for the LOWER HOUSING ASSEMBLY.
3 Lift the TRANSFORMER up.
4 Lift and remove the POWER MODULE.
5 Cut the 2 WIRE TIES on the SMALL BOARD between the MOTOR and MECHANISM
ASSEMBLY.
6 Disconnect the 2 violet wires from the CYCLE SOLENOID on the SMALL BOARD.
7 Pull the SMALL BOARD up.
8 Disconnect all wires on the MOTOR.
Removals and Installations