Media-Store and Memory Registers
The images or animations loaded into each
Media-Store channel are saved when you store
settings to a memory register. You can choose
whether or not the images or animations are recalled
when you recall the memory register.
To configure Media-Store memory recall
behavior:
1.
Press RECALL.
2.
Press NEXT until Media Recall is displayed.
3.
Use the Media knob to select the Media-Store
channel you wish to configure.
4.
Use the Recall knob to select whether the stored
image or animation is recalled to the selected
Media-Store channel during a memory recall.
You can choose from the following:
• No — The stored image or animation is not
recalled.
• Yes — The stored image or animation is
recalled and replaces the loaded image or
animation.
For More Information on...
• storing and recalling memory registers, refer to the
section "Using the Memory System" on page 33.
56
1
3
4
2