Modifying Dve Transitions - JVC KM-H2500 Manual

To change other wipe modifiers:
1. Press WIPE to display the Wipe menu.
2. Press NEXT to cycle through the available wipe
modifiers.
3. Use the corresponding knob to change the
following:
• Pattern (Pattrn) — to find and select a desired
pattern.
• X Pos or Y Pos — to position the wipe
pattern.
• Aspect — to adjust the aspect ratio.
• Border Size (Border) — to adjust the size of
the border.
• Image Softness (Soft) — to blur or harden the
border.
• Border color (only available if you set the
Border Size greater than 0.0%)
› Use the Load knob to select a preset color.
Press the Load knob to load the color.
› Use the BHue, BSat, and BLum knobs
until the desired color is achieved.
• Rotation (Rot) — to rotate the pattern.
• Horizontal (HMult) and Vertical (VMult)
Multiplication — to create multiple instances of
the pattern.
Note:
• You can select a pattern using the Pattern Buttons.
This also displays the Wipe menu.
• The X Pos and Y Pos can be adjusted using the
positioner (KM-H3000 only).
• Aspect adjustments are not available for all
patterns.
• Circle, left square, right square, and diagonal
patterns with aspect adjustments can not be
rotated.

Modifying DVE Transitions

DVE transitions can be modified to suit the needs and
style of your production. The following effects can be
adjusted:
• Time
• Direction
• DVE Effect
32
To modify time and direction:
2
1. Press DVE to display the DVE menu.
2. Press NEXT until Time is displayed.
3. Use the Time knob to change the duration of the
DVE transition.
4. Use the Dirctn knob to set the direction of the
DVE transition. You can choose from the
following:
• Fwd — Transition runs in the forward (default)
direction.
• Rev — Transition runs in the reverse
direction.
5. Press the Dirctn knob to alternately enable and
disable the flip-flop direction feature. You can
choose from the following:
• Enabled (FF) — The first time a DVE
transition is performed, it runs in the forward
direction. Performing a second DVE transition
runs in the reverse direction.
• Disabled — DVE transitions always run in the
direction specified in step 4 above.
To select a DVE effect for a transition:
2
1. Press DVE to display the DVE menu.
2. Press NEXT until Effect is displayed.
3. Use the Effect knob to select which DVE effect
to use for the transition.
3 4
1
3
1