Creating An Ftp Connection - JVC KM-H2500 Manual

To select a source on an Aux bus:
1. Select the Aux bus you wish to choose a source
on.
2. Press the desired source button on the Key/Aux
bus.
Note:
• You can also select a matte color for an Aux bus.
For More Information on...
• selecting matte colors, refer to the section "Mattes"
on page 28
Selecting a Special Source on an Aux Bus
You can select the following special sources by
selecting them on the Preset bus:
• Program bus output (AUX PGM)
• Preset bus output (AUX PV)
• Clean Feed (AUX CLN)
• Chroma Key Alpha (fourth source button)
These special sources are found on the first four
buttons on the Preset bus.
To select a special source on an Aux bus:
1
3
1. Select the Aux bus you wish to choose a source
on.
2. Press and hold SHIFT on the Key/Aux bus.
3. Press any of AUX PGM, AUX PV, AUX CLN, or
the fourth source button (to access Chroma Key
Alpha) on the Preset bus.
Fixing an Aux Bus to a Source
You can fix an Aux bus to a specific source. When
fixed, the selected source can not be changed by
selecting a different source on the control panel Aux
bus, performing a memory recall or soft reset, or by
an external editor.
44
2
To configure Aux bus fixing:
2
1
3
1. Press MENU.
2. Press the SYSTEM Wipe Pattern button.
3. Press NEXT until Fix Aux is displayed.
4. Press the Fix Aux knob to display the Aux bus
Fix menu.
5. Use the Aux knob to select the Aux bus you wish
to configure.
6. Use the Output knob to select which source the
Aux bus is fixed to. You can choose from the
following:
• NotFix — The Aux bus is not fixed to a
specific source.
• PGM — Program bus output
• PV — Preset bus output
• CLN — Clean Feed output
• ALPHA — Chroma Key Alpha
• BK — Color black
• BG — Matte generator.
• 1-12 (1-6 for KM-H2500) — Source inputs
• M1-4 — Media-Store channels
Note:
• Media-Store channels 3 and 4 are only available
when the Media-Store mode is set to Dual.
• If you are using CrossOver CleanSwitch, Aux bus
1 and Aux bus 2 can not be fixed.
• Resetting your switcher to a user-defined state, or
factory default state, overrides any fixed Aux bus
settings.
For More Information on...
• setting the Media-Store mode, refer to the section
"Media-Store Mode" on page 19.
• CrossOver CleanSwitch, refer to the section
"KM-H CleanSwitch" on page 14.
• resetting your switcher, refer to the section "Reset
Options" on page 36.

Creating an FTP Connection

You can create an FTP (File Transfer Protocol)
connection from a computer to your switcher. You can
5 6 4